Course curriculum

    1. Create Your Own Learning Assignments

    2. How to use this course

    3. Lesson 1: My Tweezers (2:57)

    4. Lesson 2: Introduction to bending curves (11:09)

    5. Lesson 3: Practicing my curves (16:25)

    6. Lesson 4: Introduction to Angles & Straight Lines (9:03)

    7. Lesson 5: Practice ; Repeat the same angle and length (6:41)

    8. Lesson 6: Combine Angles (2:49)

    9. Lesson 7: Combine Lines & Angles (4:44)

    10. Lesson 8: Sharp Pointed Angles (15:46)

    11. Lesson 9: Spirals (10:14)

    12. Lesson 10: Nautilus Spirals (8:26)

    1. Lesson 11: Bend a Double Spiral (5:08)

    2. Lesson 12: Combining Spirals (4:10)

    3. Lesson 13: Bending Double Lines (4:37)

    4. Lesson 14: Use a Mandrel to make a curve (2:15)

    5. Lesson 15: Use a Mandrel to make a curve (7:03)

    6. Lesson 16: Bending Squares (4:19)

    7. Lesson 17: Using Straight Line Wires (3:51)

    8. Lesson 18: Let's Loosen Up & Play with Wires (8:56)

    9. Lesson 19: Let's Loosen Up & Play with Wires (9:53)

    10. Lesson 20: Let's Loosen Up & Play with Wires (8:09)

    1. Lesson 21:The Angle of the Shape (Bluebird Dreamer Part 1) (9:33)

    2. Lesson 22: Bend the Bluebird (Bluebird Dreamer Part 2) (7:12)

    3. Lesson 23: Dome My Wires (5:38)

    4. Lesson 24: Dome and Glue my wire (8:26)

    5. Lesson 25: Summary: How I Dome My Wire (3:51)

    6. Lesson 26: Combine Lines to Create Shapes (11:36)

    7. Lesson 27: Brainstorm with Wire Lines (7:11)

    8. Lesson 28: Play with Wires (to create a story) (10:27)

    9. Lesson 29: Assemble My Wires using Registration Marks (Large Spiral Project) (11:38)

    10. Lesson 30: Assemble My Wires using Saral Transfer Paper (Large Spiral Project) (7:33)

    1. Lesson 31: Bend & Assemble Wires Part 1 (Cityscape) (12:32)

    2. Lesson 32: Bend & Assemble my wires Part 2 (Cityscape) (11:44)

    3. Lesson 33: Create a Pattern using closed wire shapes (11:01)

    4. Lesson 34: Create a Pattern using Open Shapes (18:34)

    5. Lesson 35: Create a Radial Pattern using Curved Wires (11:34)

    6. Lesson 36: Create a Pattern using small wire angles (8:36)

    7. Lesson 37: Anneal My Wires ​(using a hot plate "trinkit" kiln (5:18)

    8. Lesson 38: Anneal Wire Shapes ​(using a hot plate "trinkit" kiln (6:55)

    9. Lesson 39: Anneal Corrugated Wire using a hot plate kiln (1:35)

    10. Lesson 40: Anneal My Wire in a Kiln (1:53)

    1. Lesson 41: Use a Jig to duplicate wires (23:11)

    2. Lesson 42: Use a Jig to bend duplicate wires (3:00)

    3. Lesson 43: Pattern Sampler in a Grid Part 1 (13:37)

    4. Lesson 44: Pattern Sampler in a Grid Part 2 (13:03)

    5. Lesson 45: Combine Patterns inside a Shape (13:07)

    6. Lesson 46: Firing your wires with a torch (5:45)

    7. Lesson 47: Eutectic Bonds: Don't melt your wires! (3:53)

    8. Lesson 48: One Wire Designs A One Wire Flower (14:56)

    9. Lesson 49: One Wire Design Black-Eyed Susan Flower (15:41)

    10. Lesson 50: A Pattern in a Shape "Wave Line Patterns" (11:00)

    1. Lesson 51: Using Wire Lines ​to bridge two shapes (4:55)

    2. Lesson 52: A Pattern with different Shapes (4:25)

    3. Lesson 53: A Pattern that creates a Shape (8:54)

    4. Lesson 54: Straight line wires to create a Grid (5:39)

    5. Lesson 55: Straight line pattern with open shapes (6:07)

    6. Lesson 57: Short Wires and a "Feather" pattern (6:27)

    7. Lesson 58: Short Wires and a spontaneous composition (7:42)

    8. Lesson 59: An Abstract Pattern using Short Wires (4:13)

    9. Lesson 60: Short Wire Feather Pattern (1:26)

About this course

  • $79.00
  • 83 lessons